Best Bit To Use On A Horse


What is the best bit to use on a horse? You could say one of many bits. You might be asked which bit to use for training a horse for certain types of riding or driving in your area? The range of different bits you can use on a horse is extensive. You should ask your local tack shop for advice on what bit is best for that individual horse, especially when buying a new bit. If you are going to buy online make sure you know what type of riding the bit is suited to and how far from home (geographic location) you live. If a return parcel costs too much the savings on it could easily be eaten up by additional shipping fees. Be safe and order only where you can return it if it fails to meet your needs!

In order to function properly, horses require certain equipment to perform their best and be comfortable. Riders must select the proper bits for the horse they are riding. Bits come in all shapes, sizes, and metals. The Snaffle Bit is designed with a simple design, but it has several purposes to correct a horse’s behavior. The Kimberwick Bit is a variation of the snaffle bit that does not have a mouthpiece that runs through the middle of the bit.

Snaffle Bit

A snaffle bit is probably the first type of bit you’ll use. It’s a mild bit that’s good for beginners and also for older horses, who may not have teeth. The snaffle has one ring at the top, and it helps the rider to control their horse by gently pulling on the reins.

Kimberwick Bit

There are many different types of bits to choose from and they all suit different uses. If you want your horse to lower its head, the Kimberwick is a good choice. The Kimmy bit has a small mouthpiece which will help your horse calm down and give them something soft to chew on while you’re working with them. It can be used in a halter, bridle or as a bit itself!

If you have any further questions about Kimmy bits or other training equipment for horses, please feel free to contact us at [email protected]

Gag Bit

Gag bits are a type of bit that is used to create leverage on the horse’s tongue and lower jaw, which then causes the top jaw to rise up. They’re often used to encourage a horse to lower its head or turn it sideways, but they can also be used when riding in certain styles where riders want their pony’s head put into a specific position.

A gag bit is fitted by measuring the width of your horse’s mouth from side-to-side and adding 1/4″. If you end up with an odd number, go up one size; if not go down one size. Next measure the length of your horse’s tongue from front to back (or bottom lip) and add 2″. The mouthpiece should come out somewhere between these two measurements depending on how big or small you want it so that it fits comfortably but still gives good leverage for bending at both ends without being too tight or loose. Gag bits should never be fitted tightly as this could cause injury!

Full Cheek Gag Bit

The Full Cheek Gag Bit is a type of bit that prevents the horse from opening its mouth. The bit has a jointed mouthpiece, which means it can be adjusted to fit different horses. The shank is an extension of the mouthpiece, and it sits in between your horse’s cheeks. The rings are attached to either side of the shank and help secure different straps or reins. A curb chain attaches to all three parts (mouthpiece, shank, and rings) at one end and loops around a ring on top of your horse‚Äôs head at another end.

Three-Ring Gag Bit

Three-ring bits are used on a horse’s tongue instead of in the mouth. The bit works by applying pressure to the tongue and it is recommended for training purposes. It is also considered to be a mild bit, although you should still exercise caution when using one in your horse’s mouth. Because the metal rings can rub against a horse’s gums and cause irritation, this type of bit should only be used on horses that have been trained or are extremely calm and well-behaved.

Many riders use three-ring bits with inexperienced or difficult horses because they provide more control than traditional snaffle bits while at the same time allowing room for growth as their training progresses.

Four-Ring Gag Bit

A four-ring gag bit is a good bit for a horse that is hard to control, such as one that has a habit of breaking into the trot when you are riding it. It has a wide mouthpiece and long cheek piece, which makes it useful in training your horse.

The best bit to correct a horse varies depending on the horse.

The best bit to correct a horse varies depending on the horse. In order to determine what is the best bit for your horse, you must first ask yourself these questions:

  • What is your horse’s temperament?
  • How old is he or she?
  • How much training has your horse received?
  • How experienced is he or she with being ridden or handled by humans in general?
  • Is this an athletic young horse who loves to run around, kick at other horses and people, and try to buck off riders every chance they get? If so, then perhaps it’s time for a curb chain! This type of bit will allow more control over their head than any other style while also preventing them from opening their mouth too wide when fighting against it. The result? Less ear pulling and lip lacerations from fighting against an ineffective snaffle-type bit.


A pony can be stubborn, and they are not always a pleasure to ride or handle. The importance of the bit you choose is why you should carefully consider each option before making your final decision. Choosing the right one will depend on the training level and needs of your horse or pony. If your equine companion is struggling with behavior problems, it may be time to evaluate what bit will work best for them. You need something that is effective but won’t cause any unnecessary pain as well as be comfortable while riding.

Leave a Comment

Your email address will not be published.

Scroll to Top